RF-Max Digimax 210 Manual de usuario descargar pdf (Pagina 29)

29PROTECTOR28



Function addresses based on reference address:

For using this function, you need the Glass Break

Sensor GB10 (optional). This sensor contains a

photocell that (at dusk) starts a program

simulating your presence in the house. This

function only becomes active when the security

system is in the ARM AWAY mode. As soon as it

becomes dark, modules with addresses A3 and A4

(when reference address is A1, refer to 6.8) will

randomly switch on and off, so it looks like you are

at home. To simulate that you are going to sleep,

you’re switching off the modules by pressing TIME

OFF at the base station, Switching off the Lifestyle

function is now repeated every 24 hours at exactly

the same time as you pressed the TIME OFF

button.

6.9 LIFESTYLE

PROGRAM

FUNCTION ADDRESSES

Function: Address: With ref. address A1: With ref. address B3:

Alarm light [HC+[UC] A1 B3

All lights [UC] A B

Status Indicator [HC] + [UC+1] A2 B4

Lifestyle [HC] + [UC+2] [UC+3] A3 and A4 B5 and B6

External Siren [HC+1] + [5] B5 C5

Off when away [HC+1] + [6] B6 C6

CHANGING THE UNIT CODE OF THE BASE STATION

Every time you press a key you hear a short confirmation beep.

1. Set the mode switch to the INSTALL position: All indicators of occupied

zones come on

2. Key in your 4 digit PIN code (factory default [0000] refer to 5.8)

3. Press key number 1

4. Press ENTER

5. Enter the required Unit Code (1…16, e.g. press 2 for Unit Code 2, press 1

+ 5 for Unit zone 15):

6. Press ENTER

7. Reset the mode switch to the RUN 1 or RUN 2 position: Zone indicators go

out.

CONTROL INDIVIDUAL MODULES WITH THE SC2800 BASE STATION

You can also control Marmitek X-10 Home Automation modules from the keyboard of the SC2800 base

station. Key in the unit code on the keyboard (for 15: key in 1 and 5). You’ll hear a confirmation beep after

each key press. Press the UNIT ON button to switch a module on or press UNIT OFF to switch the module off.

CONTROL ALL MODULES WITH THE SC2800 BASE STATION

ALL LIGHTS ON: All lamp modules with the House Code of the base station will come on

ALL LIGHTS OFF: All modules with the House Code of the base station will go out

CONTROLLING INDIVIDUAL MODULES WITH SH624 SYSTEM REMOTE CONTROL (REFER TO 5.1).

HC: House Code

UC: Unit Code

UC+1: One Unit Code higher than the Unit

Code of the reference address of

the base station (e.g. 2 with a base

address of A1)

HC+1: One House Code higher than the

House Code of the reference

address of the base station (e.g. B

with a base address of A1)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios

RF-Max Digimax 210 Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Termostatos RF-Max Digimax 210